高强贝氏体钢测定R_(P0.2)准确性分析

对高强贝氏体钢在拉伸检测过程中影响测定RP0.2准确性的检测方法、检测设备和检测材料三个因素进行了分析。通过严格控制检测材料加工的平行度和加工面的平整度,及时更换磨损过度的钳口套和钳口并保证充分润滑,有效的解决了力学拉伸曲线紊乱,不能准确测定高强贝氏体钢非比例延伸强度RP0.2的问题。     

樊107块开发效果评价

根据岩芯化验资料、矿场测试资料、生产动态资料等,绘制理论曲线;然后采用理论对比、与同类油藏对比、与行业标准对比等方法,对含水状况、注入水利用状况、储量动用状况、地层能量保持状况等进行单因素评价与分析,最后用模糊评判法对这些因素进行综合评判。结果表明:樊107由于采用与地应力方向相适应的井网方式,单层开发,减小了层间干扰,取得了较好的开发效果。     

A genome-wide association study in Han Chinese identifies new susceptibility loci for ankylosing spondylitis

To identify susceptibility loci for ankylosing spondylitis, we performed a two-stage genome-wide association study in Han Chinese. In the discovery stage, we analyzed 1,356,350 autosomal SNPs in 1,837 individuals with ankylosing spondylitis and 4,231 controls; in the validation stage, we analyzed 30 suggestive SNPs in an additional 2,100 affected individuals and 3,496 controls. We identified two new susceptibility loci between EDIL3 and HAPLN1 at 5q14.3 (rs4552569; P = 8.77 × 10(-10)) and within ANO6 at 12q12 (rs17095830; P = 1.63 × 10(-8)). We also confirmed previously reported associations in Europeans within the major histocompatibility complex (MHC) region (top SNP, rs13202464; P < 5 × 10(-324)) and at 2p15 (rs10865331; P = 1.98 × 10(-8)). We show that rs13202464 within the MHC region mainly represents the risk effect of HLA-B*27 variants (including HLA-B*2704, HLA-B*2705 and HLA-B*2715) in Chinese. The two newly discovered loci implicate genes related to bone formation and cartilage development, suggesting their potential involvement in the etiology of ankylosing spondylitis.     

Ni-Si合金材料与Ni-Si/C复合阳极材料的结构和电化学性能研究

采用大气熔炼-机械球磨二步法制备一系列Ni-Si合金材料和Ni-Si/C复合材料,并运用X射线衍射XRD、场发射扫描电子显微镜FE-SEM和恒电流充放电等测试方法对Ni-Si合金材料和Ni-Si/C复合阳极材料的结构和电化学性能进行了研究.结果表明,Ni-Si合金材料的放电比容量随着Si含量的增加呈上升趋势,但第1周材料充放电的库仑效率下降;采用炭包覆法制备的Ni-Si/C复合阳极材料与Ni-Si合金材料相比,其电化学循环性能大幅度提升,Ni-Si/C复合阳极材料第10周放电比容量保持分数是Ni-Si合金材料的6倍左右,这是因为机械球磨使炭粉均匀地分布在合金颗粒之间,提高了复合阳极材料的导电性.     

对广告文化的现象学解读

采用现象学方法，从对广告的本质还原中全面、深入地探讨广告文化，揭示出广告文化的本质是资本的逻辑。对广告文化未来发展、倡导的思考皆应立足于这一根本认识之上。     

下水道硫化氢产生的原因及施工中的监测

城市下水道产生大量的有害气体,最常见的是硫化氢气体,本文对下水道中产生硫化氢气体的原因进行了分析并提出了减少硫化氢产生的措施和在下水道施工作业中硫化氢气体监测的方法。     

220kV升压站隔离开关动静触头过热原因分析及处理

文章介绍了220 kV的隔离开关211-1,222-2A的红外成像异常事件,为计划检修提供了可靠的依据。通过定期的远红外检测,使工作人员积累了远红外热成像判断故障的经验,并可以及时处理隔离开关故障。     

呼吸道传染病空气传播的感染概率的预测模型

为了加强对空气传染病风险的理解和预测,综述了呼吸道传染病的空气传染特点、传染途径以及预测空气传染病感染风险的模型.基于病人呼出飞沫蒸发后剩余飞沫核(通常小于5μm)在空间均匀分布的假设,介绍了预测呼吸道传染病空气传播风险模型,其中重点介绍Wells-Riley方程的推导、验证及发展,并汇总了已有报道中呼吸道传染病的病毒量(quanta产生率).根据Wells-Riley方程研究了通风和通风量、病人呼出病毒量等对感染概率的影响.结果表明,通风可以显著降低感染概率,但对于某些极端的超级传播事件,还需要其他保护措施.     

假颗粒现象及其对再生铝镁碳制品性能的影响

对用后铝镁碳砖再生颗粒料的组成和结构特点进行显微分析,并通过改变混料方式以及不同粒度再生料的加入量研究假颗粒对再生铝镁碳制品结构与性能的影响.结果表明:用后铝镁碳砖再生料中含有约40%与废砖相组成和结构相似、骨料与基质并存于同一颗粒的二次颗粒,即所谓的"假颗粒",假颗粒的组成、结构及外形的均匀程度均远不如一次骨料颗粒;混碾可使用后铝镁碳砖再生料中假颗粒发生二次破碎,且粒度越大,发生二次破碎的颗粒数量越多;假颗粒二次破碎导致再生制品的粒度组成发生改变,进而影响其密度和耐压强度.     

Hydrothermal synthesis and photoluminescence behavior of CeO<Subscript>2</Subscript> nanowires with the aid of surfactant PVP

Well-crystalline CeO₂ nanowires were prepared via a surfactant-assisted hydrothermal process. Reaction temperature and reaction time were changed for the determination of optimal synthesis parameters. The as-obtained products were characterized by X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), and field emission scanning electron microscopy (FESEM). The results show that single crystal CeO₂ nanowires with high yield and good uniformity can be obtained hydrothermally at 180°C for 12 h with the aid of 2.0 g surfactant (polyvinyl pyrrolidone, PVP). The role of PVP was then discussed and a possible growth mechanism was proposed. Moreover, room temperature photoluminescence (PL) spectra were obtained for these CeO₂ nanowires, which are believed to be related to the abundant defects in these nanostructures.